Audio Setup Menu; Analogue Output; Digital Audio Setup - Philips DVP5150X User Manual

Audio Setup Menu

1
In disc mode, press SETUP.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.
Analog Output
This options allows you to set the stereo
analog output of your DVD player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
5.1 Multi Channel
Select this to enable Dolby Pro Logic II
multi-channel output.
7.1 Multi Channel
Select this to enable Dolby Digital EX
multi-channel output.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-45_DVP5150_94_eng_RC2
DVD Setup Menu Options

Digital Audio Setup

The options included in Digital Audio
Setup are: 'Digital Output' and 'LPCM
Output'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful hint:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K: Playback a disc recorded at the
sampling rate of 96kHz. This rate can only
be achieved in Stereo-Classic (Flat) mode.
31 07/07/06, 10:34 AM
31