Audio Setup Menu; Analog Output - Philips DVP5140 User Manual

Audio Setup Menu

1
In disc mode, press SETUP.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
001-47 DVP5140_Eng_37_RC2
DVD Setup Menu Options

Analog Output

This options allows you to set the stereo
analog output of your DVD Player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
33 11/07/06, 2:02 PM
33