Connecting The Equipment - Cisco Small Business SRP520-U Quick Start Manual

Connecting the Equipment

4
For Ethernet WAN connections, connect one end of the Ethernet
S 1
TEP
cable to your Internet access device (typically a modem), and
connect the other end of the cable to the WAN port.
For ADSL connections, connect your DSL cable directly to the DSL
port on your SRP526W-U or SRP527W-U. If required by your
Service Provider, make sure that you use an ADSL splitter.
SRP521W-U Ethernet WAN Connections
SRP526W-U / SRP527W-U ADSL Connections
DSL Port
Connect wired computers and other network devices to the LAN
S 2
TEP
ports (1–4).
(Optional) Connect an analog telephone, fax machine, or similar
S 3
TEP
device to the Phone (FXS) ports. Then connect the Line (FXO) ports
to the telephone line wall socket port(s).
Connect the plug adaptor provided for your region to the power
S 4
TEP
supply. Only use the power adapter that was provided with the
unit.
Connect the power adapter to the 12V DC port on your SRP.
S 5
TEP
10 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
2 1
PHONE (FXS) LINE (FXO)
2 1
DSL PHONE (FXS) LINE (FXO)
4 3
WAN (10/100) LAN (10/100)
WAN (10/100) Port
4 3
LAN/WAN LAN (10/100)
2 1
12VDC
2 1