Honeywell HD31H(X) User Manual page 4

4
Warnings Follow these
safeguards to prevent
serious injury or death.
Warnings
WARNING: Installation and servicing should be performed only by qualified
and experienced technicians to conform to all local codes and to maintain
your warranty.
WARNING: This device is configured for 12 V DC operation only. Do not
connect to a higher voltage. Use only with NRTL approved Class 2 or LPS
power supplies. To prevent potential ground loop issues, a separate PSU
should be used for each camera. A multiple-output PSU may be used if the
multiple output PSU has isolated and protected (2 A max) outputs.
Cautions
CAUTION: The light emitted from the near-infrared light emitting diodes
(LEDs) provides illumination over a wide area. This light is not considered
a risk to the unshielded human eye. However, as with any light source, it is
recommended that normal precautions be taken to avoid unnecessary
HD40H(X)/HD30H(X)/HD31H(X) Camera User Guide
Cautions Follow these
precautions to prevent potential
injury or material damage.
800-18605 – Rev A – 06/2014