Panasonic FZ-A2 series Operating Instructions Manual page 3

DANGER
Precautions on the Built-in Bridge
Battery (for disposal)
<Only for model with Built-in Bridge Bat-
tery>
When disposing the battery, generation
of heat, ignition or rupture of the Built-in
Bridge Battery may result. ( Operating
Instructions - Basic Guide)
Handling This Computer
 Do Not Disassemble the Com-
puter Except When Disposing
Handling the Built-in Bridge Bat-
tery
 Do Not Short the Positive (+) and
Negative (-) Contacts
 Do Not Throw the Battery into
a Fire or Expose It to Excessive
Heat
 Do Not Apply Shocks to the Built-
in Bridge Battery by Dropping It,
Applying Strong Pressure to It,
etc.
 Do Not Charge
 Do Not Use
 Do Not Deform, Disassemble, or
Modify the Built-in Bridge Battery
Pack
 Avoid Extreme Heat (Near the
Fire, in Direct Sunlight, for Ex-
ample)
WARNING
<Only for model with Built-in Bridge Bat-
tery>
Generation of heat, ignition or rupture of
the Built-in Bridge Battery may result.
 Do Not Throw This Product Into
a Fire or Expose It to Excessive
Heat
 Do Not Insert Sharp Objects Into
This Product, Disassemble, or
Modify It
 Do Not Apply Shocks to the
Product by Dropping It, Applying
Strong Pressure to It, etc.
 Do Not Charge the Built-in Bridge
Battery Pack Using Methods
Other Than Those Specifi ed
 Avoid Extreme Heat (Near the
Fire, In Direct Sunlight, for Ex-
ample)
 When the Built-in Bridge Battery
Pack Has Deteriorated or If Ab-
normal Swelling Occur, Contact
Your Technical Support Office to
Replace the Battery
3