Connecting Your Tv Or Projector - Onkyo TX-NR901 Instruction Manual

Using the Remote Controller with Other Components—Continued
Controlling a TV
1. Press the [MODE] button, and then roll the scroll
wheel to select TV.
2. Point the remote controller at your satellite
receiver, and use the following buttons (you must
enter appropriate remote control code first).
TV on/off
TV [ ]
TV CH [+]/[–] Select TV channels
[ENTER] Confirm selection
Number buttons Enter numbers
Adjust the TV volume
TV VOL [ ]/[ ]
The following buttons control the TX-NR901.
[VOL] Adjust the TX-NR901 volume
[MUTING] Mute the TX-NR901
Controlling a Cable Receiver
1. Press the [MODE] button, and then roll the scroll
wheel to select CBL.
2. Point the remote controller at your satellite
receiver, and use the following buttons (you must
enter appropriate remote control code first).
Set the cable receiver to On or
[ON], [STANDBY]
Standby
[CH/DISC] Select cable channels
[ENTER] Confirm selection
[TV INPUT] Select TV or VCR input
Number buttons Enter numbers
The following buttons control the TX-NR901.
[VOL] Adjust the TX-NR901 volume
[MUTING] Mute the TX-NR901
93