ABB i-bus KNX Product Manual page 17

®

i-bus KNX
Resources: Provides information about free channels and communication objects
7
available.
a. KNX communication objects: KNX communication objects used from total.
b. EnOcean channels: Channels used from total available.
8
Plugin version: It indicates the current plugin version.
EnOcean Device: Name/type of the selected device (as it appears in the LCD
9
screen).
10
General device settings: General parameters values of the integrated device. More
details in section 5.1.2.
In case that the added device needs/has the option of setting some initial values, you
can click on the Edit initial data... link. When clicking, new windows will pop-up
showing editable parameters. In this same window, there is also a link to the EEP
specification document, so field value specifications for each parameter can be found.
KNX communication objects settings: List of editable parameters for enabled
11
communication objects. More details about communication object settings can be
found in section 5.1.3 .
Reset configuration: Resets current configuration erasing all nodes and
12
communication objects in the project. Text below the button indicates when the last
configuration was saved.
Import catalogue: Imports an IKE file with all available EnOcean devices. Text below
13
the button indicates current catalogue version.
1
All EnOcean devices occupy 1 channel except AC interfaces, which occupy 3 channels.
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
Figure 5.4 Initial data to transmit screen
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
1
16 / 47