Philips DVP3040 User Manual page 41

Problem
Not able to select some items in the
setup/system menu.
The DVD player does not start
playback.
Picture freezes momentarily during
playback.
Unable to select Progressive Scan on/
off.
Unable to play DivX movies.
No sound during DivX movies
playback.
An DivX movies does not repeat.
01-43_dvp3040_37_eng2.indd 41 01-43_dvp3040_37_eng2.indd 41
Troubleshooting
– Press STOP button twice before selecting the setup/system
menu.
– Depending on the disc availability, some menu items cannot
be selected.
– Insert a readable disc with the playback side facing down.
– Check the disc type, color system (PAL/NTSC) and region
code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the setup menu screen.
– You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
– Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
– Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
– Check the disc for fi ngerprint/scratches and clean with a soft
cloth wiping from center to edge.
– Check that the output of the video signal is turn to
{ YPbPr }.
– Check that the DivX fi le is encoded in 'Home Theatre' mode
with DivX 5.x encoder.
– Check that the DivX movie downloaded is a complete fi le.
– The audio codec may not be supported by this DVD player.
– Check that fi le size of the movie does not exceed the fi le size
of the disc during downloading.
Need Help? Visit us at www.philips.com/support
(continued)
Solution
2006-07-14 3:35:43 PM 2006-07-14 3:35:43 PM
41