■ MEMORY INITIALIZATION (メモリーの初期化)
The following procedure initializes the IMX644 memory.
CAUTION
•
All data stored in memory will be erased when the memory is
initialized. Perform the following procedure with caution.
1
Turn the IMX644 power OFF.
2
Turn the power back ON while simultaneously holding
the MEMORY [A] and [D] buttons.
Initialization will take about one second.
When initialization is complete the odd-numbered matrix
input channel indicators will light.
3
To recall the initial memory data press a MEMORY
button for longer than two seconds.
NOTE
•
Initialization erases the password required to connect the
IMX644 Manager application to the IMX644 unit. After
initialization it will be necessary to set a new password to bring
the IMX644 online.
IMX644 のメモリーを初期化できます。
注意
・ メモリーを初期化すると、メモリーの内容が失われます。
以下の操作は慎重に行なってください。
1
IMX644 の電源をオフにします。
2
MEMORY[A]と MEMORY[D]ボタンを押しなが
ら電源をオンにします。
初期化は約 1 秒で終了します。
初期化が完了すると奇数入力チャンネルのマトリッ
クスランプが点灯します。
3
初 期 状 態 の メ モ リ ー を 呼 び 出 す た め、 任 意 の
MEMORY ボタンを 2 秒以上押し続けます。
NOTE
・ 初期化によって、本体に設定されている IMX644 Manager
とオンラインにするためのパスワードも消去されます。
初期化後、初めて IMX644 Manager をオンラインにする
場合は、パスワードを再設定してください。
IMX644
47