www.freeservicemanuals.info
6-2 Troubleshooting Procedures by Error Modes
6-2-1 Installation & Connection
● : Light is On
◑ : Light is Blinking
○ : Light is Off
TIMER
LAMP
○
○
○
◑
●
◑
◑
○
○
◑
○
○
◑
◑
* It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
* The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it working.
Samsung Electronics
STAND BY/TEMP
Standby state.
●
The picture will automatically appear in about 15 seconds.
○
Auto Timer ON/OFF has been set and the set will automatically be turned on in about 25
○
seconds.
A cooling fan inside the set is not operating normally.
◑
Lamp cover on rear of the set is not properly shut.
◑
Check if the ventilation hole on the rear of the set is blocked, because if the inner
◑
temperature is too high, the power will shut off.
Lamp may be defective.
◑
Published in Heiloo, Holland.
POWER
Press to turn the TV on and off.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Indication
9/13/15
Troubleshooting
6-7