Panasonic KX-NS500 Getting Started page 57

Note
Alternatively, it is possible to set an extension
number as a password for each SIP extension
automatically.
•
In order to set the password automatically, do the
following in substitution for step c of the procedure
above.
a.
Click Copy to. A screen will appear with
information on assigned extension numbers for
SIP extensions.
b.
Click Select All.
c.
Click Execute to copy each Extension Number
to Password.
d.
Click Yes.
e.
Click OK to return to the Port Property screen.
•
When copying extension numbers to passwords,
you can also use the
the Virtual SIP Extension Port Property screen.
4. Programme the SIP extension you wish to register.
a.
Set the IP address of the PBX, extension number,
and password in the corresponding fields for your
SIP extension.
b.
Send a request from the SIP extension to the PBX
for registration.
•
If the authentication information of the SIP
extension and the PBX match, the registration is
successful.
Note
•
When programming the SIP extension, the
names of the corresponding fields may differ
depending on the type of SIP phone you are
using.
•
For details about the actual operation of SIP
phones, refer to the documentation of the SIP
phone.
•
For certain SIP phones, you may need to set a
Sign-in name, which should consist of the
extension number and the IP address of the PBX
(e.g., 350@192.168.0.101).
4.3.2 Registering IP Telephones
icon on the bottom left of
Getting Started 57