Tools Needed For Assembly; Assembly And Adjustments - Black & Decker SM1850BD Instruction Manual

TOOLS NEEDED FOR
ASSEMBLY
Supplied
Blade Wrench
Not Supplied
Phillips Screwdriver
Slotted Screwdriver
Adjustable Wrench
8 mm Hex Wrench
Combination Square
ASSEMBLY AND
ADJUSTMENTS
WARNING
!
• To avoid injury, do not connect this
miter saw to the power source until
it is completely assembled and
adjusted, and you have read and
understood this Operator's Manual.
• To reduce the risk of injury, turn
unit off and disconnect it from
power source before installing
and removing accessories, before
adjusting or when making repairs.
An accidental start-up can cause
injury.
TRANSPORTING THE SAW (FIGURE A)
WARNING
!
• To reduce the risk of injury, turn unit
off and disconnect it from power
source before installing and removing
accessories, before adjusting or
when making repairs. An accidental
start-up can cause injury.
• To reduce the risk of serious
personal injury, ALWAYS lock the
miter table locking lever, bevel lock
handle, and hold-down latch before
transporting saw.
• In order to conveniently carry the miter
saw from place to place, use the hand
holds (1) in the base.
A
1
RELEASING THE CUTTING HEAD
(FIGURE B)
WARNING
!
damage to the saw, transport or store
the miter saw with the cutting head
locked in the down position. Never use
the hold down latch to hold the cutting
head in a down position for cutting
operations.
12
To avoid injury and