Sony DXC-970MD Instructions For Use Manual page 69

3
FLASH (sync) connector
Connects to a flash slave unit when the camera is in the
flash mode.
4 BARS (color bars output) button
Pressing this button for one second outputs the color bars
signal. Press again to revert to video signal output.
For monitor adjustment, contact your authorized Sony dealer.
5 MENU (menu recall) button
Pressing this button for one second brings up the
operational settings menu on the monitor connected to the
camera. Press again to hide the menu.
For menu operation, see "Changing the Camera Settings" on
page 85.
6 FUNCTION UP/DOWN (cursor up/down) buttons
UP button: moves the menu cursor upwards.
DOWN button: moves the menu cursor downwards.
7 DATA DOWN (setting value reduction)/
(flash) button
With the menu displayed: decreases the setting value.
With the menu hidden: activates the flash button when in
the flash mode.
8 DATA UP/
WHITE (setting value increase/
white balance adjustment) button
With the menu displayed: increases the setting value.
With the menu hidden: activates the automatic white
balance adjustment function when the camera is in the Auto
mode.
9 LENS connector (6-pin)
Connects to a lens cable when a
This connector is not used for
0 CCU (camera control unit) connector (20-pin)
Reserved for future use.
2
/ -inch zoom lens is used.
3
1
/ -inch zoom lenses.
2
69