Other Settings; Updating The Disklavier - Yamaha DISKLAVIER ENSPIRE ST/PRO Owner's Manual

Other Settings

Chapter
3

Updating the Disklavier

You can update the Disklavier firmware using USB flash memory.
1
Download the update program file.
You can download the update program from the following site:
http://download.yamaha.com/
2
Copy "en_update.bin" included in the downloaded file to
the root directory of the USB flash memory.
3
Press the POWER
4
Connect the USB flash memory to the USB port on the
front of the switch box.
5
Holding the PLAY/PAUSE button, press the POWER
button.
The POWER
update mode.
+
If any available update program is detected, the Disklavier starts to
update. The update progress is indicated with the VOLUME
indicators.
When the update is complete, the Disklavier restarts automatically.
After the Disklavier restarts, check the firmware version using the
ENSPIRE Controller app.
button to turn the power off.
USB flash memory
USB port
indicator flashes, and the Disklavier enters the
Flashing
twice
Note:
• To update your Disklavier, you
will need a USB flash memory
with 2GB or more of free space.
• You can also update your
Disklavier using the ENSPIRE
Controller app. To update your
Disklavier using the app, Internet
connection is required.
Note:
It is recommended that the USB
flash memory only contains the
update program file.
Important:
DO NOT turn the power off or
disconnect the USB flash memory
during update.
20