Table of Contents
Advertisement
Preparation
TV
4
3
MULTICHANNEL AUDIO OUT
LEFT
CENTER
LEFT
REAR
FRONT
DIGITAL AUDIO OUT
STEREO OUT
VIDEO OUT
PCM/MPEG2/AC3/DTS
RIGHT SUBW.
RIGHT
R
L
(CVBS)
(Y/C)
OPT OUT
DIG OUT
REAR
FRONT
AUDIO
VIDEO OUT
S-VIDEO OUT
14 PREPARATION
1
2
1
2
I
AUX-
I
/O
1
II
TO TV-
I
/O
2
General notes
- Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player.These are shown
in the following drawing.
Please refer to your TV,VCR, Stereo System and any other User
Manual(s) as necessary to make the optimal connections.
- Do not connect your DVD-player via your VCR, because the video
quality could be distorted by the copy protected system.
- For better sound reproduction you can connect the player audio
outputs to your amplifier, receiver, stereo system or A/V equipment.
For this see 'Connecting to audio equipment' and 'Multi-Channel
sound connections ' on the next page.
Caution: Do not connect the player's audio output to the
phono input of your audio system.
Connect to a TV
Connect the Euroconnector to the corresponding connector on the
TV using the Euroconnector cable supplied (1).
If your TV is not equipped with a Euroconnector you can select
one of the following alternative connections:
S-Video (Y/C) connection
Connect the S-Video socket to the corresponding socket on the TV
using an optional S-Video cable (2).
Connect the audio Left and Right output sockets to the corresponding
sockets on the TV using the audio cable supplied (4).
Video CVBS connection
Connect the Video socket to the corresponding socket on the TV using
the video cable supplied (3).
Connect the audio Left and Right output sockets to the corresponding
sockets on the TV using the audio cable supplied (4).
Advertisement
Table of Contents
