Quick Disc Playback 17 - Philips DVD795SA Owner's Manual

1
DVD 795SA
Many playback features and options are available on Discs. Familiarize
yourself with the Player and its remote as described on pages 18-22.
Then see pages 23 and following to try other features.
1
Press STANDBY-ON y y to turn on the Player. The red
Standby light will disappear from the front of the Player.
2
Turn on your TV. Set it to the correct Video In channel.
This is not channel 3 or 4 (as it might be for a VCR), but a distinct
Video In channel. (When using an RF modulator as described on
page 9, the Video In channel is 3 or 4.) You should see the
Player's blue background screen on the TV. If you cannot find the
correct Video In channel, see your TV owner's manual.
3
Press OPEN/CLOSE c on the Player to open the disc
tray. Load up to five Discs in the tray, with only one Disc
per slot. Load Discs with the label facing up and the shiny side
facing down as you place the Disc in the tray. If the Disc is two-
sided, make sure the side you want to play is facing up.
4 Press OPEN/CLOSE c again to close the tray. Playback
may begin automatically.
5
To play a specific Disc, press DISC repeatedly. Or, press a
Disc (1,2,3,4,5) button on the front of the Player.
6
If playback does not start automatically, press PLAY :.
For a DVD, a Disc menu may appear. If the Title or Chapter
selections are numbered, press a Number button to select an
item. Or, press 98 ; : to select an item to play, then
press OK.
7
To stop playback, press STOP C.
Resume
Resume works with the last five DVDs, Video CDs, and Super Video
CDs. Press STOP C to stop playback and set up Resume. The next time
you play the Disc, play will resume at the point at which you stopped it.
If you press STOP C twice to stop playback, Resume will not be activat-
ed. The next time you play the Disc, play will start at the beginning of the
Disc.
The Resume symbol (below) may appear on the TV when you reload a
Disc. Press PLAY : while Resume appears; play will resume at the point
at which you stopped playback.
resume
5

Quick Disc Playback 17

3-4
5
T-C
DISC DIM
1 2
4 5
7 8
RETURN
0
DISC
MENU
É
OK
G
7
PLAY
STOP
Ç
É
SUBTITLE ANGLE ZOOM
REPEAT REPEAT SHUFFLE SCAN
A-B
Helpful Hints
• If the Disc is Locked by Access
Control, you must enter the four-
digit code or unlock the Disc.
Details are on pages 30-33.
• DVDs have a region code. Your
Player will not play discs that
have a region code different from
the region code of your Player.
The Player's region code is 1
(one). Details are on page 8.
• Resume may not be available
with all Discs.
• When playing MP3 files or
SACDs, you will not have sound
using the DIGITAL AUDIO OUT
jacks. Details are on page 36.
• If a Video CD will not play, make
sure Playback Control is Off.
Details are on page 38.
• Pressing PLAY, OPEN/CLOSE,
EXCHANGE, DISC, or DISC
1,2,3,4,5 will close the disc tray.
POWER
2
SOUND MODE
3
6
9
DISPLAY
SYSTEM
MENU
6
É
H
PAUSE
Å
AUDIO