IOGear GUWAVKIT4 User Manual page 14

G: Radio Communications Change/Select the channel used for radio communication -
The Communications tab of the UWB Connection Manager enables you to view and change
radio settings. The default channel setting is Automatic, which enables the host radio to
automatically locate an available channel for communications.
Note: It is recommended to leave this setting on Automatic. If you manually select a channel
that is being used by another GUWAVKIT4 in the vicinity, the channel bandwidth will be shared
by both devices. To maximize performance, there are eight channels to choose from and a
separate channel should be used for each GUWAVKIT4.
H: Disable/Enable Radio Communications - To temporarily disable the host radio, do the
following: Under the Communications tab, click the Off button in the Communication Status.
The radio is now in Airplane Mode and the UWB Connection Manager Icon in the System Tray
will now turn Orange:
14