Connecting Tv; Using Cvbs Jack; Using S-Video Jack - Philips DVD760 Owner's Manual

Connections

Connecting TV

TO TV
AUDIO IN
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
COAXIAL OPTICAL
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.

Using CVBS jack

1
Use the composite video cable (yellow)
to connect the DVD Player's CVBS
(VIDEO) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the TV (cable supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
10
Back
of TV
RIGHT
AUDIO IN
VIDEO IN
LEFT
AUDIO IN
TO TV
VIDEO IN
1
3
R L
VIDEO
PROGRESSIVE
S-VIDEO
INTERLACE
Pr/Cr Pb/Cb
Y
2
Back
of TV
S-VIDEO IN
TO TV
S-VIDEO IN
1
OUT
/
PROGRESSIVE
S-VIDEO
ICAL

Using S-Video jack

1
Use the S-Video cable to connect the
DVD Player's S-VIDEO OUT jack to the
S-Video input jack (or labeled as Y/C or S-
VHS) on the TV (cable not supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
LEFT
AUDIO IN
RIGHT
AUDIO IN
TO TV
AUDIO IN
3
R L
VIDEO
INTERLACE
Pr/Cr Pb/Cb
Y
2