Door Handle Replacement Instructions - Stanley brandon dhw Installation And Commissioning Manual

Step 1
Remove the 2 round head screws and the retaining clip on the back of the door while ensuring the spring
behind does not spring out. See Fig. A & B.
Round Head
Screws
Step 2
Remove the compression spring and screw. See
Fig. C.
Compression Spring

DOOR HANDLE REPLACEMENT INSTRUCTIONS

Tools required
* Small Philips head screw driver
* 2 mm allen key
* Flat head screwdriver.
Fig.A
Retaining
Clip
Fig.C
Fig.B
Round Head
Screws
Step 3
From the front face loosen the grub screw on the
underside of the latch using the 2mm allen key.
See Fig.D.
Fig.D
Grub Screw
21
Retaining
Clip