Changing The Color Of An Ap - Cisco aironet 2800 series Deployment Manual

Physical Hardware and Mounting Options
Wall mounting units with internal antennas in the orientation shown in
Note
units with internal antennas
bracket unless roaming is not an issue, example: hotspot, kiosk, or very small venue areas where large
uniform coverage is not needed.
Figure 21: Third Party options to Wall Mount

Changing the Color of an AP

If there is a desire to change the color of an AP, rather than painting the AP which would void the warranty,
consider using colored vinyl tape or using a colored plastic cover from Oberon.
Figure 22: Third-party option for changing AP color, adding custom Logo, or hiding the LED
should be avoided. AP 2800i & AP 3800i should use the Oberon mounting
Cisco Aironet Series 2800/3800 Access Point Deployment Guide
Changing the Color of an AP
Figure 20: Avoid wall mounting
21