Parental Control - Philips DVD-930 User Manual

Philips dvd video player user manual
Table of Contents

Advertisement

1/DVD-930/935-ENGLISH
10-08-1999 09:56 Pagina 16

PARENTAL CONTROL

SETTINGS
AUTOPLAY:
Factory setting On means that discs start to play automatically
when loaded. Set to Off if you prefer to start play manually.
AUTO FTS:
Factory setting On means that when a disc with an FTS
program (see 'Compiling an FTS Program' p. 15) is loaded, the
FTS program automatically starts to play. Set to Off if you
prefer to control FTS play manually.
VIDEO SHIFT:
Factory setting is such that the video will be centered on your
screen. Use this setting to personalize the position of the
picture on your TV by scrolling it to the left or right.
ACTIVATING PARENTAL CONROL
This can only be done in Stop mode.
• Press Setup to obtain the Settings menu.
• Move to Parental Control using the (up/down) keys.
• Press < or > to change Parental Control to Active.
• You will be asked to enter a 4-digit pin code of your own choice,
and then to confirm your choice.
• This code must then be entered to play any DVD-Video or Video
CD disc, unless you have previously authorized the disc as
suitable for all ages.
• To de-activate Parental Control repeat the above procedure.
TRY 3X
TRY 3X
When Parental Control is active
When Parental Conteol is active
Insert Disc
Insert Disc
Open Tray
Open Tray
NOT OK
NOT OK
NO
NO
Is this
Is this
Enter Pin
Enter Pin
disc Authorized?
disc Authorized?
OK
OK
YES
YES
Normal operation
Normal operation
DIGITAL OUTPUT:
Factory setting Off means that there is no audio signal at the
digital output. If you are connecting equipment with a
digital input, change the setting to on.
If your equipment doesn't incluid a digital decoder, (e.g. digital
speakers) set the digital output to PCM.
OSD LANGUAGE:
The player's on-screen display will be in the language you
choose.
Authorizing discs
1 Load the disc you wish to authorize and close the tray
2 The OSD will ask for your pin code.
Enter your pin code.
3 Go to Stop, press 9.
4 Select Parental Control on the OSD by pressing >: the OSD
will ask you to enter your pin code.
5 The disc is now authorized, and will play in the normal way,
without the pin code.
To cancel your authorization, repeat steps 4 and 5.
– You can have a total of 50 authorized discs. If you exceed
that number, the least frequently played disc(s) are
automatically de-authorized.
Press "STOP"
Press "STOP"
Select
Select
Change
Change
Parental Control
Parental Control
Autorization
Autorization
Enter Pin Code
Enter Pin Code
OK
OK
16
NOTE
NOT OK
NOT OK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents