Main Unit - Philips DTP4800 User Manual

Tuner/Reception/Transmission
TV system: PAL
Connections
Antenna input
Passive RF loopthrough output
HDMI output
Component output
SCART output
Digital output:
LPCM
Radio
Teletext

Main Unit

Net Weight: 2.2 kg
Power
Power consumption: 15 W
Power consumption in standby mode: < 1 W
Remote control and batteries
AV cables
User Manual
Quick Start Guide
Warning
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
Disconnect this product from the power
outlet for a few minutes, then connect again.
No reaction to the remote control.
Connect this product to the power outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Picture
No picture or pictures appear in an improperly way.
See the TVs user manual on how to select
the correct input on the TV. Change the TV
channel until you see the Philips screen.
If the progressive scan mode is turned on
and pictures appear in an improperly way,
deselect the progressive scan to turn off the
setting" > "General settings" > "Video
If this product is connected to an unauthorized
video signal may not be output.
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
If this happens when you change the HDMI
video resolution, you have to switch to its
to open the disc
numeric button "1".
19