Table of Contents
Advertisement
EN
54
Setting a timer while watching digital
TV or listening to digital radio
- Press TIMER.
- Set the desired Timer type: Recording timers,
Reminders, or Sleep Timer, and then press OK.
- Set the values of the recording parameters using the
arrow or number keys as appropriate (for more
details, refer to paragraph Recording timers and
Reminders).
- Press OK to confirm.
Setting a timer from the Timers sub
menu
- Select the Recording timers item from the Timer sub
menu.
- Select Add timer.
- Set the values of the recording parameters using the
arrow or number keys as appropriate (for more
details, refer to paragraph Recording timers and
Reminders).
- Press OK to confirm.
Deleting an active timer
A timer is active. Recording is signalled by two front
LEDs: the right hand one lit in red and the left hand one
lit in green in TV mode or in orange in Radio mode, or
both LEDs lit in red if your receiver is in standby.
To delete the active timer:
- If your receiver is in standby, press P+, P-, or any
number key of the remote control.
- Press the key sequence TIMER then 0.The red light
then switches off and you can change channels.
When a recording timer is active, you cannot change
digital channels, but you can switch to analogue TV using
the TV/STB key and zap through analogue channels.
Advertisement
Table of Contents
