Advertisement
1.Installing the System onto the seat back in a car
(Refer to Figure 2)
Seat Standoff
1). Take one of the supplied straps from the carrier bag. Con-
nect the latch to one of the upper metal rings on the mounti
ng bag. Connect the "S" hook to the other upper metal ring
and place the loop over the headrest. Adjust the strap until
the bag is firmly secured.
2). Take another strap from the carrier bag, and connect the latch
to the lower metal ring on the left side of the bag. Attach the
"S" hook to the same ring after looping the strap around the
seat rail. Repeat this process for the right side. In some
vehicles, it may be necessary to attach the "S" connector to
the rail directly, as it may not be long enough to reach back to
the ring.
3). Adjust the straps tightly so that the bag is secured.
Figure 2
6
Advertisement
