D-Link DNR-322L User Manual page 57

Section 4 - Configuration
You can save the NVR configuration to a file and restore it when necessary, such as
restarting the NVR in the event of a crash. Reset the NVR to restore all configurations to
factory default.
System If the NVR is malfunctioning or crashes unexpectedly, click Restart on the
Restart:
NVR. Restarting the NVR will take about ninety seconds.
Restore
This will reset all settings back to the factory defaults.
to Factory
Default
Settings:
Save Click Save to save the file.
Configuration
Settings:
Load All the configurations can be saved as a file to the specified location.
Configuration You can restore the configuration file after resetting to factory default
Settings: file. Click Browse to select the configuration file and restore it by clicking
Load.
Idle Time When the administrator enters all the Setup pages (except the Live Video
(Minutes): and Playback Page), the NVR will keep track of the idle time when the user
is not active. If this inactive period exceeds the specified limit, the user will
be logged out and will have to log in again for security purposes. You can
change the idle time limit here.
Buzzer: Enable or disable the buzzer. This is an audible alarm that sounds off
when an event is triggered.
Enable Auto Enable or disable auto plugin. Enabling auto plugin allows the NVR
Plugin: to automatically detect any connected cameras on the LAN. NVR will
automatically change the secondary video profile of IP cameras once this
option is enabled.
D-Link DNR-322L User Manual
System
53