Quality Start - Ricoh Priport VT 6000 Service Manual

29 January 1998
For more details about this mechanism, refer to the following 'Paper Detection and
Printing Pressure On/Off Mechanism' section.

Quality Start

The detection arm release solenoid which was used in the C223 has been
removed. Since the paper detection feeler has been removed, the detection arm
release solenoid is not necessary to start the drum stroke operation in the quality
start mode.
When the drum stroke operation starts, the printing pressure solenoid turns on.
This disengages the pressure on/off lever and starts applying the printing
pressure.
NOTE: For the details of the quality start mode operation, refer to the C223
Service Manual. (Section 5.4 'Quality Start Operation' in the 'Detailed
Section Descriptions' section.)
2-9
PRINTING