Control Panel And Features - Whirlpool 1CWTW4845EW Use And Care Manual

Control Panel and Features

1
1
LOAD SIZE
1
Select the setting most suitable for your load. Small
will add a low amount of water for smaller loads and Ex
Large will add the most amount of water for large or bulky
loads. Items need to move freely. Tightly packing can lead
to poor cleaning performance and may increase wrinkling
and tangling.
WASH TEMP
2
Wash Temp senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• On some models and cycles, warm and hot water may
be cooler than your previous washer.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
4
2
2
Not all features and options are available on all models. Appearance may vary.
4
5
8 7 6
SOIL LEVEL (on some models)
3
This option allows you to set the soil level based on the
degree of dirt for the load you are washing.
EXTRA RINSE
4
This option can be used to automatically add a second rinse
to most cycles.
WASH CYCLE KNOB
5
Use the Wash Cycle knob to select cycles on your washer.
Knob does not advance during the progress of the cycle, see
cycle status/progress lights for each stage of the process.
See "Cycle Guide" for detailed descriptions of cycles.
START/STOP BUTTON
6
Press to start the selected cycle; press again to pause the
cycle and unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid.
5
7
8 6
3 4