JVC LT-40X776/S Service Manual page 133

Auto Tuner Setup
The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
To TUNER MODE (IN ANALOG)
π †
è
To choose CABLE, AIR or SKIP
To TUNER MODE (IN DIGITAL)
π †
è
To choose ATSC, DIGITAL CABLE or SKIP
Press the O
Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
button
ENU
button to start
K
Initial Setup
AUTO TUNER SETUP
IN ANALOG
TUNER MODE
IN DIGITAL
TUNER MODE
PRESS OK TO START
SELECT OPERATE
AIR
ATSC
EXIT
MENU
35