JVC LT-40X776/S Service Manual page 12

3.2.14 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws [A], then remove the SPEAKER (L /R).
NOTE:
• Since the speaker is attached in a certain direction, attach
the speaker in the same correct direction as it has been
attached.
• When the speaker is decomposed, the performance cannot
be kept.
3.2.15 REMOVING THE FRONT LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
• Remove the SUB POWER PWB BRACKET.
(1) Remove the 2 screws [B], then remove the FRONT LED
PWB.
3.2.16 REMOVING THE LED LENS (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
• Remove the SUB POWER PWB BRACKET.
• Remove the FRONT LED PWB.
(1) Remove the 2 screws [M], then remove the LED LENS.
3.2.17 REMOVING THE CARD PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [C], then remove the CARD BASE.
(2) Remove the 1 screw [D], then remove the CARD PWB
BRACKET with CARD PWB.
(3) Remove the 4 screws [E], then remove the CARD PWB.
3.2.18 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
• Remove the CARD PWB BRACKET.
(1) Remove the 2 screws [F], then remove the MAIN BASE.
(2) Remove the 4 screws [G] and the 2 screw [H], then remove
the TOP FRAME.
(3) Remove the 2 screws [J] and the 2 screws [K], then
remove the BOTTOM FRAME.
(4) Remove the 2 screws [L], then remove the SUB
BRACKET.
(5) Remove the LCD PANEL UNIT from the FRONT PANEL.
1-12 (No.YA301)