Startup
1
Connect the power cord to the DC socket
of the PhotoFrame and then to a power
supply socket.
A few seconds later, the PhotoFrame
»
turns on automatically.
2
Move the joystick up/down to select a
language, and then press OK .
3
Move the joystick up/down/right/left to set
time and date, and then press OK .
4
To start PhotoFrame, select
[Start PhotoFrame] and then press OK .
5
To start slideshow, select [Play] and then
press OK .
•
To pause slideshow, press
•
To resume slideshow, press
•
To turn off the PhotoFrame, press and
hold .
OK .
OK again.