Select Display Auto On/Off - Philips 8FF3WMI User Manual

3
Select [Memory Card], then press OK to
confi rm.
4
Select [Do Not Allow] / [Allow], then
press OK to confi rm.

Select display auto on/off

With SmartPower Pro function on the
PhotoFrame, you can confi gure the time for
the PhotoFrame to turn on or off the display
automatically. You can also adjust the brightness
sensor for the PhotoFrame to turn on or off
the display according to the ambient brightness.
To enable the SmartPower Pro function, ensure
that:
• The current time or sensor level of the
PhotoFrame is set correctly.
• The PhotoFrame is turned on.
Specify time to auto on/off
1
In the main menu, select [Settings], then
press OK to confi rm.
2
Select [Installation], then press OK to
confi rm.
3
Select [SmartPower Pro], then press OK
to confi rm.
EN 39