Selecting A Mode; How To Use The Touch Screen; Using With The Remote Control - Panasonic HDC-TM700PC Service Manual

Selecting a mode

Change the mode to recording or playback.
Operate the mode dial to change the mode to
Align with the status indicator
Motion Picture Recording Mode
Still Picture Recording Mode
Playback Mode
How to use the touch
screen
You can operate by directly touching the
LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied)
for detailed operation or if it is hard to
operate with your fingers.
Touch
Touch and release the touch screen to select
icon or picture.
Touch the center of the icon.
Touching the touch screen will not operate
while you are touching another part of the
touch screen.
About the operation icons
/ / / :
These icons are used to switch the menu
and thumbnail display page, for item
selection and setting etc.
:
Touch to return to the previous screen
such as when setting menus.
Do not touch on the LCD monitor with
hard pointed tips, such as ball point pens.
Perform the touch screen calibration when
the touch is not recognized or wrong
location is recognized.
,
.
Using with the remote
control
Select the menu.
[REMOTE CONTROL]
1 Power on/off button [
Power can be turned on/off when the LCD
monitor is opened or the viewfinder is
extended.
Power cannot be turned on by the power
●
on/off button when 36 hours have passed
after the power is turned off. Press the
power button on the unit and turn the
power back on.
Power cannot be turned off when it is
●
connected to the PC or the DVD burner.
2 Photoshot button [
3 On-screen display button
[EXT DISPLAY]
4 Playback operation buttons
These buttons function in the same manner
as the corresponding playback operation
icon being displayed on screen.
[Excluding skip playback.]
5 Delete button [
6 Direction buttons [ , , , ]
7 Zoom/volume/thumbnail display
switch buttons [T, W,
8 Recording start/stop button [START/STOP]
9 Date/time button [DATE/TIME]
10 Menu button [MENU]
11 OK button [OK]
* means that these buttons function in the
same manner as the corresponding
buttons on the unit.
16
or .
: [SETUP]
[ON]
7
1
START/
STOP
2 8
/VOL
EXT DISPLAY DATE/TIME
9
3
SEARCH PLAY SEARCH
4 STILL ADV PAUSE STILL ADV
SKIP STOP SKIP
10
5
MENU
6
OK
11
]
*
]
*
]
/VOL]*
*
*