Configuring a VPLS Service with CLI
Configuring a VPLS SAP
A default QoS policy is applied to each ingress and egress SAP. Additional QoS policies can be
configured in the
configured in the
Use the following CLI syntax to create:
VPLS SAP
•
•
Local VPLS SAPs
To configure a local VPLS service, enter the
IDs in the same service configuration.
Example
The following example displays the local VPLS configuration:
*A:ALA-1>config>service# info
----------------------------------------------
...
----------------------------------------------
*A:ALA-1>config>service#
Page 386
config>qos
config>filter
Local VPLS SAPs on page 386
Distributed VPLS SAPs on page 387
:
config>service# vpls 9001 customer 6 create
config>service>vpls# sap 1/2/2:0 create
config>service>vpls>sap$ no shutdown
config>service>vpls>sap# description "SAP for local service"
config>service>vpls>sap# exit
config>service>vpls# sap 1/1/5:0 create
config>service>vpls>sap$ no shutdown
config>service>vpls>sap# description "SAP for local service"
config>service>vpls>sap# exit
vpls 90001 customer 6 create
description "Local VPLS"
stp
shutdown
exit
sap 1/2/2:0 create
description "SAP for local service"
exit
sap 1/1/5:0 create
description "SAP for local service"
exit
no shutdown
exit
context. There are no default filter policies. Filter policies are
context and must be explicitly applied to a SAP.
sap sap-id
7750 SR OS Services Guide
command twice with different port