Hitachi IJ UX Instruction Manual page 33

2
Loosen the screw and remove the print head cover.
Around nozzle
Loosen the screw.
Pull out.
Print head cover
Clean the inside of the cleaning section with makeup.
3
Clean the nozzle orifice, charge electrode, deflection electrode, gutter, and mounting base with makeup.
(Also see "1.3 Print head cleaning".)
Air exhaust port
Charge electrode
Deflection electrode
Cleaning bottle
Gutter
Nozzle Orifice
Mounting base
Area to be cleaned
Beaker
* Thoroughly wipe off the makeup on the surface of each part (including the mounting base) and dry each part
thoroughly with wiping paper.
●Start operation 3-6