Hitachi IJ RX2 Technical Manual page 73

5.3.5-2 Text setup rules
(1) Line count
● When you change the line count for a print item in a certain column, you must also set the line
count for the other print items that belong to the same column.
(Example)
1 3 5
2 4 6
Transmit the line count consecutively to items 7 and 8. If you transmit the line count to only one
of them, a communication error occurs.
● When you change the line count for a print item, you must also set the line count for the other print
items that belong to the same column as the former one.
(Example)
1 3 5
2 4 6
Transmit the line count consecutively to items 7 and 8. If you transmit the line count to only one
of them, a communication error occurs.
(2) Line spacing
● When you transmit one-line setup data for a certain print item, you have to transmit a line spacing
setting of "0" as well as for the same chain as the one-line setup data.
If you do not transmit an line spacing setting of "0", a communication error occurs.
● Ensure that the same line spacing setting is selected for print items belonging to the same column.
In other words, when you transmit a new line spacing setting for a print item in a certain column,
you must consecutively transmit the same setting to the other print items in the same column.
(3) Character size and inter-character space
● The available inter-character space varies with the character size.
See "4.7.4 Set dot matrix, inter-character space, and other parameters"
Manual.
● The total number of vertical dots cannot exceed the limit.
Machine type
RX2-BD, RX2-SD(3-line)
Option:RX2-SD(4-line)
Option:RX2-SD(5-line)
● Some characters cannot be entered depending on the character size. If a print
item contains an unavailable character after a character size change, its contents
are changed to a space.
See "4.7.4 Set dot matrix, inter-character space, and other parameters"
Manual.
● If an inter-character space other than "0" is transmitted for a print item for which bar code setup is
completed, a communication error occurs.
7
8
Setting items 7 and 8 to one line
7 8
Setting items 7 and 8 to two lines
Maximum number of vertical dots
1 3
2 4
1
2
4
of the Instructions
30 dots
32 dots
32 dots
3
of the Instructions
●Transmission Sequences 5-17
5
6 7 8
3 5 7
4 6 8