5.3 . EDID Procedure
DDC User' s manual
1. Hardware installation
A. The EDID cable has equipped 2 different terminals;
one is male 25 pin printer connector and another side is male 15 pin D-sub connecter.
B. Connect the EDID cable from PC Printer port to monitor D-sub connector.
C. Make sure the monitor was working under power saving mode and keep it at "Power
Saving state" during DDC process.
PC printer
port 25pin
connector
ViewSonic Corporation
EDID-Kit
Cable
23
D-Sub of
Monitor
15pin VGA
Confidential
D o Not Copy
V P930/b