Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
ViewSonic
®
N4200w
LCD Display
- User Guide
Guide de l'utilisateur
-
- Guida dell'utente
-
Model No. : VS10945-1M

Summary of Contents

  • Page 1

    ViewSonic ® N4200w LCD Display - User Guide Guide de l’utilisateur - Guida dell’utente Model No. : VS10945-1M...

  • Page 2: Table Of Contents

    Move loudspeaker secure...8 View of the Product ...9 Remote Control ...12 Installation ...14 RS232 Module...21 Basic Operation ...24 OSD Functions OSD style and operation tips ...26 OSD Operation ...26 Other Information Specifications ...35 Troubleshooting...36 Customer Support ...38 Limited Warranty ...39 N4200w ViewSonic...

  • Page 3: Compliance Information

    The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. N4200w ViewSonic...

  • Page 4: Declaration Of Rohs Compliance

    4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. N4200w ViewSonic Proposed Maximum Actual...

  • Page 5: Important Safety Instructions

    N4200w ViewSonic...

  • Page 6: Copyright Information, Product Registration

    ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

  • Page 7: Cleaning The Lcd Display, Disclaimer

    LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. N4200w...

  • Page 8: Package Contents

    Getting Started Congratulations on your purchase of a ViewSonic Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD display package includes: LCD Display VGA Cable Quick Start Guide N4200w ViewSonic ® LCD display.

  • Page 9: The Wall Type Is Installed

    The wall type is installed Use only approved wall-mounting brackets advised by ViewSonic or your local distributor. To install the wall-mounting brackets to LCD display and fix LCD display to the wall safely, please use the following guidelines: Cut off the power.

  • Page 10: Move Loudspeaker Secure

    Move loudspeaker secure To detach the loudspeakers from the LCD display, please read the following guidelines: Cut off the power. Disassemble 6 screws of the back loudspeaker(3 screws on each side). Exert oneself outward, remove the loudspeaker N4200w ViewSonic...

  • Page 11: View Of The Product

    Decrease volume or adjust a highlighted control decreasingly while in OSD menu Increase volume or adjust a highlighted control increasingly VOL + while in OSD menu Channel down/ Scroll down Channel up/ Scroll up Turn the power ON/OFF POWER N4200w ViewSonic...

  • Page 12

    Have one HDMI cable terminals of your DVD player. HDMI(2) Connect the VGA cable output of PC to the VGA terminal input. Connect the Audio in cable from audio output of your PC PC STEREO to the audio input terminal. N4200w ViewSonic...

  • Page 13

    Connect Audio cable from compatible devices into the side jack. Connect the external video device into this jack. Pr/Cr Connect the external video device into this jack. Pb/Cb Connect the external video device into this jack. N4200w ViewSonic...

  • Page 14: Remote Control

    Remote Control Remote control button function as follow Source button 0~100+ number button Volume CC button N4200w ViewSonic Select Input Source No functions Adjust Volume Close Caption...

  • Page 15

    Change the display position of the Sub Picture in PIP mode Toggles between input sources for the Main and Sub picture Enable/Disable Surround Sound Change Aspect Ratio Display menu or exit OSD menu No function No function Power ON/OFF ViewSonic N4200w...

  • Page 16: Installation

    Dispose of the battery in accordance with local laws and regulations. Keep the battery away from children and pets. When the remote control will not be used for an extended period, remove the batteries. N4200w ViewSonic...

  • Page 17

    2. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N4200W. AV model: RCA A/V Cable (Cable not supplied) S-Video model: S-Video Cable (Cable not supplied) Audio in Cable...

  • Page 18

    YCbCr model: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR YPbPr model: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR N4200w ViewSonic...

  • Page 19

    HDMI model: Connect the HDMI cable from DVI output of your DVD player to the HDMI terminal input of N4200W. HDMI cable DVD Player (Cable not supplied) HDMI Cable (Cable not supplied) Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting HDMI audio to HDMI.

  • Page 20

    3. Connect to the PC VGA (15pin D-Sub): Connect the VGA cable from VGA output of PC to the VGA terminal input of N4200W. PC up to 1280 x 1024 , or 1360 x 768 is the preferred resolution. VGA 15 Pin Cable...

  • Page 21

    Connect the HDMI cable from DVI output of PC to the HDMI terminal input of N4200W. HDMI Cable (Cable not supplied) 4. Connect power cable Connect the power cord to the N4200W then to a properly grounded AC outlet. Turn on the AC Switch on the back of N4200W AC Switch...

  • Page 22

    5. Turn Power ON Press the Power button under the LCD Display, or press the Power On (red) button on the Remote Control. Turn Video source power ON. N4200w ViewSonic...

  • Page 23: Rs232 Module

    RS232 module is installed onto the back of the cabinet and connected with signal cables (six lines group) from the module to the back panel of N4200w as factory setting. The signal line is connected from the Debug port of RS232 to that of the Display.

  • Page 24

    Then, the new hyper terminal is created, and you can input commands properly to conduct easy control of the system for certain functions with RS232 module’s correct connection with N4200w and the PC. N4200w ViewSonic All Programs >...

  • Page 25

    Operation To realize certain function of the system, you need to input the corresponding commands properly in the hyper terminal window. Note: As for the detailed commands for the functions, please refer to the command list attached additionally. N4200w ViewSonic...

  • Page 26: Basic Operation

    To select the required input sources. Use ▲▼to move the cursor bar, and select by pressing VOLUME Adjusting Press VOL-/+ to adjust the volume. To silence the volume, press MUTE. If you want to restore volume, press MUTE again. VOLUME N4200w ViewSonic...

  • Page 27

    Source menu Select the source you want. Select VGA, then PC mode appears. Select others, then AV mode appears. N4200w ViewSonic...

  • Page 28: Osd Style And Operation Tips, Osd Operation

    (For PC mode) The 4 icons at the top of the OSD Main menu stand for the 4 sub menus (Picture, Adjust, Audio, Setup). (For AV mode) The 4 icons at the top of the OSD Main menu stand for the 4 sub menus (Picture, Audio, Setup, Parental) N4200w ViewSonic...

  • Page 29

    ►or ◄ to select color temp. ► to increase the color temp. ◄ to decrease the color temp. ►or◄ to select Graphic or Text. ►or◄ to select Single, PBP, PIP. HDMI input is not supported in sub picture) N4200w ViewSonic...

  • Page 30

    H.position the main and sub picture in PIP. Adjust the vertical position of the main and sub picture in PIP. V. position N4200w ViewSonic Operation ► to select Auto Sync. ► to increase the delay time ◄ to decrease the delay time.

  • Page 31

    ►or◄ to select SRS Trusurround or OFF. ► to increase lower-pitched sound. ◄ to decrease lower-pitched sound. ► to increase higher-pitched sound. ◄ to decrease higher-pitched sound. ► to emphasize the right speaker. ◄ to emphasize the left speaker. ViewSonic N4200w...

  • Page 32

    OSD Position the Display Adjust OSD’s transparency level. Transparency OSD Timer Adjust OSD show time. N4200w ViewSonic Operation ►or◄ to select Normal/Wide Press► for setup. ►or◄ to select OSD language. ►or◄ to select five kinds of OSD position on the Display.

  • Page 33

    ◄to decrease the Hue. ► to sharpen the display. ◄ to soften the display. ►or◄ to select ON or OFF. ►or ◄ to select color ►or◄ to select OFF, PBP, PIP. HDMI input is not supported in sub picture) N4200w ViewSonic...

  • Page 34

    Adjust the bass. Bass Adjust the treble. Treble Adjust the left and right Balance audio balance. N4200w ViewSonic Operation ►or◄ to select SRS Trusurround or ► to increase lower-pitched sound. ◄ to decrease lower-pitched sound. ► to increase higher-pitched sound.

  • Page 35

    ►or◄ to select ON or OFF. Press► for setup. ►or◄ to select OSD language. ►or◄ to select five kinds of OSD position on the Display. ► to increase the transparency ◄ to decrease the transparency. ►or◄ to select show time. N4200w ViewSonic...

  • Page 36

    Password Setup password Setup the film rating Rating Setup classification To select Close caption CC Setup N4200w ViewSonic Operation ►or◄ to select on or off. press►, then enter the number as the password you hope. press►, then select the classification you want and press OK.

  • Page 37: Specifications

    To 40,000 feet (12,000m) 1243 mm (W) x 739 mm (H) x 304mm (D) 48.93 inch (W) x 29.09 inch (H) x 11.96 inch (D) 33kg (72.68 lb) FCC, UL, cUL, NOM <240 W LED Green <3 W ViewSonic N4200w...

  • Page 38: Troubleshooting

    AVC System, or unplug the AC cord for 1 to 2 minutes, then replug again. Power is cut off suddenly Is the sleep timer set? The internal temperature of the unit has increased. Remove any objects blocking the vent or clean as necessary. N4200w ViewSonic...

  • Page 39

    Picture is cut off/with sidebar screen Is the image positioned correctly? Are screen mode adjustments such as picture size set correctly? N4200w ViewSonic...

  • Page 40: Customer Support

    You will need the product serial number. NOTE: Contry/ Web site Region United www.viewsonic.com States /support/ www.viewsonic.com Canada /support/ N4200w ViewSonic T = Telephone Email F = FAX T = (800) 688 6688 Service.us@viewsonic.com F = (909) 468 1202 T = (866) 463 4775 Service.ca@viewsonic.com...

  • Page 41: Limited Warranty

    How long the warranty is effective: ViewSonic LCD displays are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the first customer purchase.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: