Panasonic DMR-EH80VEG Service Manual page 24

DMR-EH80VEG / DMR-EH80VEB
Mode name
RAM Drive Last Error
Delete the Last Drive
Error
Turn on all FL/LEDs
PB HIGH Signal Output
PB MIDDLE Signal
Output
Front connection
inspection
Item
Description
RAM Drive error code display.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
*Details are described in
"(DVD) Service Explorer".
Delete the Last Drive Error information
stored on the DVD RAM-Drive.
All segments of FL and all LEDs are turned
on.
8 pin of AV 1 Jack (PB HIGH terminal) is
High (approx. 11V DC).
8 pin of AV 1 Jack (PB HIGH terminal) is
Middle (approx. 5.5V DC).
Press all front keys and check the
connection between Main P.C.B. and Front
P.C.B.
FL display
1. Error Number is displayed for 5
seconds.
2. Time when the error has
occurred is displayed for 5
seconds.
Y: Year
MM: Month
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is
displayed for 5 seconds.
4. Last Drive Error (2/2) is
displayed for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
7. Factor of Drive Error occurring is
left displayed
All segments are turned on.
(1) Each time a key is pressed,
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
24
Key operation
(Remote controller key)
Press [4] [2] in service mode.
Then press [0] [1] ~ [9] [9], the
past 99 errors are displayed.
In case that the supplier cannot be
identified, display is black out.
Press [9] [6] in service mode.
Press [5] [1] in service mode.
Press [5] [2] in service mode.
Press [5] [3] in service mode.
Press [5] [4] in service mode.