Table of Contents
Advertisement
•
To repeat a segment between two points (A and B), press REP A-B (on remote
control) at the beginning of the segment you want to repeat. Allow the disc to play
to the end of the segment to the end point (B). Press REP A-B (on remote control)
again at the end of the segment. The segment plays repeatedly until you press REP
A-B (on remote control) to resume normal playback.
Note: Repeat function is only available on remote control.
Angle
Some discs offer different camera angles for specific scenes.
•
To change the camera angle, press ANGLE (on remote control) repeatedly to select
the camera angle.
•
If the disc was recorded using a single camera angle, this function is not available.
Note: If you want to access the angle function, adjust the setting through Setting
menu before pressing ANGLE on remote control (refer to the General Setup Page
section).
30
Advertisement
Table of Contents
