Table of Contents
Advertisement
With two extra front loudspeakers connected
*
'Dolby' 'Pro Logic' and the double-D symbol
Manufactured under license from Dolby Laboratories Licensing Corporation.
Features menu
Features
TV
Channel list
Subtitle
Lock
Sleeptimer
Custom lock
Child lock
Unlock
On timer
&
Press the cursor right to select
é
Select the menu items with the cursor
up/down and adjust the settings with the
cursor left/right.
Use the on-screen Menu-Info
information about the menu items.
Channel list
Press the
key to switch over to the selected
OK
TV channel or external.
Select subtitles
The subtitle page must be stored for each TV
channel:
Switch on teletext and select the proper subtitle
page from the index. Switch off teletext.
will automatically display them on the
Subtitle On
selected TV channels if subtitles are in the
transmission. A symbol will indicate that the mode
is on.
Select
On during mute
the subtitles automatically displayed only when the
sound has been muted with the ¬ key on the
remote control.
are trademarks of Dolby Laboratories Licensing Corporation.
Channel lock
.
Features
i
for more
when you want to have
To enhance the sound reproduction of your TV you may
connect two extra front loudspeakers via an external
amplifier. See Connect Peripheral Equipment, Connect
external speakers/amplifier, p. 21.
In the Surround modes
that you should switch on your amplifier as in these
modes the internal TV speakers produce only centre
sound.The subwoofer speaker is muted.
Note: If extra front speakers are connected and selected, all
internal TV speakers produce centre sound in the surround
modes Pro Logic*, Dolby 3 Stereo and 3D Surround.
Child lock
&
Select
Child lock
é
Press the cursor right to enter the Child lock
menu.You're summoned to enter your code.
Note:You have to re-enter your code each time you
enter the child lock menu.
Important:You have forgotten your code !
• Select Cancel with the cursor down.
• Select Set/Change code in the Setup
menu. See General menu, Set/Change
code, p. 9.
• Press OK.
• Press the cursor right and enter the
overriding code 8-8-8-8.
• Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Note: The overriding code only works in the
Set/Change code menu.
"
Select one of the menu items of the child lock
menu:
•
if you want to lock all channels and
Lock
externals.
•
Custom lock
Select:
-
Channel lock
TV channel or external;
•
to disable all locks you have set.
Unlock
is added to indicate
+ ext. amp
.
and press the cursor right.
if you want to lock a certain
13
Advertisement
Table of Contents
