NEC NP3150 User Manual page 56

7. Use the SELECT
Screen
8. Press the ENTER button.
Screen
9. Use the SELECT
On the Cornerstone adjustment screen, select [EXIT] or press the EXIT button on the remote control.
Screen
The confirmation screen is displayed.
10.Press the SELECT
E
RE E
O
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D Reform adjustment, [ASPECT RATIO] and [SCREEN] may not be available. Should this happen, first reset the
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
3D Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing [ASPECT RATIO] and/or [SCREEN]
setting can limit [3D REFORM] in its adjustable range.
button to move the projected image frame as shown on the example.
button to select another icon which points in the direction.
or button to highlight the [OK] and press the ENTER button.
41
4. Convenient Features