Replacement Of Projection Polarizer (B, G); Replacement Of Pbs Array (Analysis Block) - Panasonic PT-P1SDU Service Manual

Note:
· Because the hook is damaged easily, be careful not
to expand it excessively.
5. Replace the incidence polarizer.
Note:
· Be careful not to touch the surface of incidence
polarizer.
6.17. Replacement of Projection
Polarizer (B, G)
· The procedure is described as an example of projection
polarizer (B).
1. Remove the LCD block according to the section 6.12.
"Removal of LCD Block".
2. Remove the projection polarizer (B) or (G) which requires
replacing.
(The projection polarizer is secured with adhesive tape.)
Notes:
· Be careful not to damage peripheral components
(prism, LCD panel, etc.).
· Use tweezers.
3. Install new projection polarizer.
a. Put adhesive tape on the projection polarizer.
b. Stick the projection polarizer on the specified position.
Notes:
· Align the projection polarizer with the guides
(lower, side) of LCD block.
· Be careful not to touch the surface of projection
polarizer.
· Use tweezers.
c. Press the adhesive part and secure the projection
polarizer.
6.18. Replacement of PBS Array
(Analysis Block)
1. Remove the analysis case (upper) according to the steps 1
through 4 in the section 6.16. "Replacement of Incidence
17
PT-P1SDU / PT-P1SDE / PT-P1SDEA