This chapter provides information about locating and using system LEDs and switches in the
server. For additional information about troubleshooting procedures, refer to the HP
ProLiant ML370 Generation 3 Server Setup and Installation Guide.
System LEDs
The server contains several sets of LEDs that indicate the status and settings of hardware
components. This chapter discusses the following types and locations of LEDs:
•
Front panel
•
Hot-plug SCSI hard drive
•
RJ-45 connector
•
Rear unit identification LED switch
•
Hot-plug power supply
•
Hot-plug fan
•
System board
Information at the end of this section discusses the interactions between external and system
board LEDs in troubleshooting or assessing system status.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide
LED Indicators and Switches
4
4-1