Philips Magnavox MX3291B Use And Installation Manual

Color Television and Remote Control
A
NTENNA OR
C TV
ABLE
A ( ) A & B I
NT ENNA NPUTS
Y
our TV has two sepa-
rate ANT(enna)/Cable
inputs on the rear of the
set. These two signal
inputs offer convenient
hook-up options for both
normal TV program view-
ing and Picture-In-Picture
(PIP) features.
The ANT(enna) A input is
intended for use and view-
ing on the TV's main
screen. Your home's prima-
ry Antenna, or Cable TV
signal, should be connect-
ed to this input for normal
TV setup, use and feature
operation.
The ANT(enna) B input is
a second, or auxiliary sig-
nal source, designed to
supply your TV's Picture-
In-Picture (PIP) feature.
For many homes the use of
a single existing Antenna
(or Cable TV) source, for
both ANT A and B, will be
the preferred method of
connection. This type of
connection (optional
Signal Splitter required)
will work properly for the
TV's Main on-screen fea-
tures, as well as retain all
the features designed for
PIP. For more details refer
to the Picture-In-Picture
section in your other
owner's manual.
C B
ABLE OX
C C B
ABLE ONVERTER OXES
F
or homes with Cable
TV Converter
Descrambler Boxes (with
Premium/Movie Channels
scrambled), follow the
steps to the right for an
alternative ANT A and
ANT B PIP feature
hookup. Note the Cable TV
signal will be split before
connection to the
Converter box (an option-
al two-way 75 ohm Signal
Splitter will be required).
Q
UICK
How to Use the "INSTALL" Controls ..................2-3
• Using the Language Control ...................................2
• Setting the TV to Auto Program Channels .............2
• Setting the TV for a Cable or Antenna Signal ........2
• Using the Adding and Deleting Channels...............3
• Setting the Channel Name Control .........................3
• How to use the Smart Clock control.......................3
Basic TV and Remote Control Operation .................4
BEGIN
A typical ANT(enna)
A and B connection (using a
common signal source and an
optional Signal Splitter):
If your Antenna or Cable TV
signal has a round cable con-
nector (75 ohm) on the end,
then you're ready to connect it
to the 75ohm Signal Splitter.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter before connecting
to the 75ohm Signal Splitter.
300 to 75Ω Adapter
Twin Lead
Wire
OR
Round Cable
75Ω Ohm
1
OR
Cable TV Signal
Round Cable
75Ω Ohm
• The signal routed to the TV's ANT A input will allow for
Premium/Movie channels to be viewable on the TV.
• Channel selection will be at the Converter.
• The ANT A input channel on the TV should be set to the same
output channel as the Converter box (usually CH3 or 4).
Cable TV Company
OPTIONAL TWO-WAY
SIGNAL SPLITTER
BEGIN
Connect your Cable
TV signal to the single 75 ohm
INPUT plug on a two-way
Signal Splitter (optional).
U
SE AND
T
ABLE OF
Getting Started
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Connect your Antenna or
Cable TV signal to the single
75 ohm input plug on the two-
way Signal Splitter (optional).
Then connect two lengths of RF
Coaxial Cable to the two Output
plugs on the two-way Signal
Splitter (F-type connector on
both ends).
Combination VHF/UHF Antenna
- Outdoor or Indoor Antenna -
receives normal broadcast channels
2-13 (VHF) and 14-69 (UHF).
2
OPTIONAL TWO-WAY
SIGNAL SPLITTER
ANT(enna) A
(single 75ohm Input to twin
Input
75 ohm Outputs - optional
RF Coaxial connecting
cables also required)
Cable TV Company
Connect to ANT A Input
Cable TV Converter
Box Connection
Connect one end of RF
Coaxial Cable to each of the
OUTPUT plugs on the 75 ohm
Signal Splitter. The two lengths
of RF Coaxial Cable need F-
type connectors (screw-on or
push type) for both ends.
3135 015 05920
I
NSTALLATION
C
ONTENTS
• For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
Connect the twin Output
plugs on the Signal Splitter to
the ANT A and ANT B inputs
on the rear of the TV. Push the
round connector end of the RF
Coaxial Cable onto the
ANT(enna) plug and screw it
down tight (if using threaded
cables).
Back of TV
8 8
+ R – – L +
SURROUND SOUND
ATTENTION - TO AVOID DAMAGE
PIP ANT "B" S-VIDEO 1. DO NOT CONNECT SURROUND SOUND SPEAKERS
75 TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER OUTPUT TOGETHER.
VIDEO
L
AUDIO
ANT "A"
75 R/MONO
IN-2 IN-1 OUT
ANT(enna) B
Input
8 8
+ R – – L +
SURROUND SOUND
ATTENTION - TO AVOID DAMAGE
PIP ANT "B"
S-VIDEO
1. DO NOT CONNECT SURROUND SOUND SPEAKERS
75
TO A SEPARATE AMPLIFIER OR TO SPEAKERS
CONNECTED TO ANOTHER PRODUCT.
2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
OUTPUT TOGETHER.
VIDEO
L
AUDIO
ANT "A" 3
75
R/MONO
IN-2 IN-1 OUT
Note: Proper operation of your TV is not dependent upon
connection of the ANT B input. Its main purpose is to provide
an easily connected, dedicated picture source for PIP feature
use. Other signal source options (such as a satellite dish sys-
tem, additional external antenna, VCR, or Video Game) could
also be connected and displayed on the TV screen through the
use of the ANT B input.
Note: Although the ANT B input can be used and swapped
as the source for the TV's Main picture, certain setup fea-
tures (such as Smart Clock) are only based on a signal being
detected at the ANT A input. To ensure that all features are
operating properly, you may not want to rely solely on the ANT
B input as your TV's Main screen signal source.
Connect to ANT B Input
Connect one of the Signal
Splitter OUTPUTs to the
INput terminal on the Cable
TV Converter Box. Then route
another connection from the
Cable Converter OUTput ter-
minal to the ANT A Input on
the rear of the TV.
G
UIDE
S
MART
H
ELP
Remember,
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "TUNER"
section on page 2 of
this Guide.)
Your TV can set
itself to select only
the channel numbers
on your Cable sys-
tem (see "Auto
Program" page 2). If
you use a Cable
Converter box, set
the TV to the same
channel as the con-
verter's CH 3/4
switch (on the rear of
the converter.)
To order accessories
such as those listed
below contact your
dealer or our Parts
Information Center
at: 1-800-851-8885.
• Two Way Splitter
• 300-75 ohm
Adapter
• UHF/VHF
Antenna
Combiner
• The signal routed to the TV's
ANT B input will allow for the
selection and viewing of Cable
channels at the TV (except for the
scrambled Premium/Movie
channels).
Connect the remaining
Signal Splitter OUTPUT
from the Splitter to the ANT
B Input on the rear of the TV.