Advertisement
•
Free protected programs
With this item all protected programs can be
freed. If "free protected programs" is set to
"ON", all programs are accessible for the
user, if the item is "OFF" protected programs
can be selected but with picture and sound
muted.
•
ESP
Energy Saving Programmability Mode (ESP)
controls the maximum continuous viewing
time allowed by the control system.
It is provided to allow the installed
establishment to limit the time the television
remains activated once a Guest has
checked-out of their room.
The ESP Menu function is shown as "ESP",
and its valid values are 00 - 99 (in hours).
•
System Interface
This item is only present in "system" sets
and it is used to enable or disable
communication with the DCM.
•
Audio/Video Mute
The Audio/Video Mute menu function
determines whether the video should be
blanked and the audio should be muted if
the currently tuned channel has no signal
(Blue, Black, Off).
•
Welcome Message
Select "Welcome Message" with RC: with
cursor left/right the following sub menu will
be displayed: Welcome Message, Line 1,
Line 2. With the cursor up/down you can set
the message characters.
•
Program Guide
This feature checks for program labels that
have been assigned to the programs via the
LABELS function, and if those programs are
in the program ring, will display in a "list" or
"page", the program numbers with the
associated labels.
•
Reminder
This menu function is shown as
"REMINDER", and its states are "ON":
"OFF".
When the Reminder function is highlighted,
the status message displays the current
state of the control.
•
Security
The menu function "SECURITY" allows the
user to select one of two states "HIGH" or
"STANDARD". The default is "STANDARD".
While the set is in the Security High state the
setup menu can only be accessed by a
T374AH Institutional Setup remote menu
command.
While the set is in the Security Standard
state the Setup Menu may be accessed with
a normal guest cursor remote control by a
sequence of numbers.
4
Advertisement
