Advertisement
Store
The present program information, is
stored after pressing the cursor left/right
button. Press Menu to exit without storing.
Fine Tune
Using the "control left/right" commands
starts fine-tuning.
Protection
This bit indicates whether the selected
program has a protection or not. With the
cursor left/right keys the protection can
toggle between "ON" and "OFF".
Label
This menu item will be used to add a
label/name for each program. Pressing
the left/right buttons you may enter or exit
the label field; pressing the up/down
cursor you may insert alphanumeric
characters.
Teletext Language
This menu enables the user to select the
teletext character set to be used for the
selected channel. With cursor left/right
you can select a letter corresponding to
the different language clusters.
Video Blank
This item can change between "ON" and
"OFF" to indicate if a picture mute is
necessary.
Audio Mute
This item can change between "ON" and
"OFF" to indicate if a sound mute is
necessary.
Remarks
TV up/down, INFO up/down, PAY-TV
up/down and RADIO up/down are active in
menu mode and the TV reacts the same
way as in TV mode.
•
Radio Installation (if radio present)
This menu appears only if an internal radio
is installed. The following subset of the TV
installation menu items is displayed and has
the same functionality: search, program,
label, protection, store, exit. The frequency
range for internal radio is 87.50 - 108.00
MHz FM. Beside program "RAD XX"
appears, where XX is the selected program
number; the type is RAD and is not
selectable.
Search
The Search function is activated by
pressing the "+" or Cursor Right button
via the local keyboard or remote control.
Program
The user can cursor down to the
"Program" menu item until it is highlighted
and select a program number via the
Digits, Cursor Right, or Cursor Left
commands.
Protection
This menu item will be used to "Protect"
or "Lock" each program individually.
Label
This menu item will be used to add a
label/name for each program.
Store
This menu item is used to store the
information displayed in the Radio
installation sub menu.
•
Clock Installation (if clock present)
The Clock Installation menu is displayed
when the Clock Installation menu item is
selected by highlighting the Clock
Installation menu item with either Cursor Up
or Cursor Down.
Display Standby
This menu item will be used to set the
intensity of the display of the clock when
the TV is in standby mode.
Display On
This menu item will be used to set the
intensity of the display of the clock when
the TV is in the On mode.
Time Setting
This menu item will be used to set the
time for the clock.
Teletext Downloading
This menu item will be used to activate or
deactivate the time downloading function.
Teletext Program
This menu item will be used to select the
channel from which to retrieve the correct
time from the teletext. When this item is
selected the TV set tunes to the selected
program.
2
Advertisement
