Package Contents; Description (Fi G. A) - DeWalt D25102(K) Instruction Manual

5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional safety instructions for
rotary hammers
• Wear ear protectors. Exposure to noise can
cause hearing loss.
• Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
• Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Cutting accessory
Contacting a "live" wire may make exposed
metal parts of the tool "live" and shock the
operator.
• Be certain that the material being drilled does
not conceal electric or gas service and that
their locations have been verified with the utility
companies.
• Keep a firm grip on the tool at all times. Do not
attempt to operate this tool without holding it
with both hands. Operating this tool with one
hand will result in loss of control. Breaking
through or encountering hard materials such as
re-bar may be hazardous as well. Tighten the
side handle securely before use.
• Ensure the chisel is secured in place before
operating the tool.
• In cold-weather conditions or when the tool
has not been used for a longer period of time,
let the tool run with no load for several minutes
before use.
• When working above ground level ensure the
area below is clear.
• Do not touch the chisel or the parts close to the
chisel immediately after operation, as they may
be extremely hot and cause burns to the skin.
• Always direct the power cable to the rear, away
from the chisel.
• Do not operate this tool for long periods of
time. Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.

Package contents

The package contains:
1 Heavy duty rotary hammer drill
1 Side handle
1 Depth adjustment rod
1 Kitbox (K-models only)
1 Keyless chuck (D25104K)
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
Your heavy-duty rotary hammer drill D25102(K)/
D25103K/D25104K/D25203K has been designed
for professional rotary and hammer drilling,
screwdriving and light chipping, chiselling, demolition
applications and for carbide-tipped core drilling into
concrete, brick, stone and other masonry materials.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This rotary hammer drill is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
1 Variable speed switch
2 Lock-on button
(D25102(K)/D25103K/D25104K)
3 Forward/reverse slider
4 Mode selector
5 Safety lock
6 Tool holder
7 Dust cover
8 Locking collar (D25104K)
9 Depth adjustment rod
10 Side handle
11 Depth stop clamp
EN GL IS H
7