Data Usage Settings - TP-Link m7310 User Manual

Click Save to save your settings.

Note:
To use the DHCP server function of the Mobile Wi-Fi, you should configure all clients in the LAN
as "Obtain an IP Address automatically" mode. This function will take effect until the Mobile
Wi-Fi reboots Wi-Fi.

4.4.4 Data Usage Settings

You can configure data usage settings on this page.

Total/Monthly Used - Total/Monthly data used. You can click Correct and input the actual
data amount to correct the data.

Note:
Actual data usage may vary from the estimated data usage displayed on the usage meter.

Data Usage Limit - You can enable or disable the function of data usage limit. If enabled,
you can set the data quota.

Total/Monthly Allowance - Enter the data allowance. When your data usage reaches the
allowance, the Mobile Wi-Fi will automatically disconnect from the Internet and the circle
icon on the screen will turn to red.

Usage Alert - Enter the usage alert percentage. When data usage reaches the alert
percentage, the circle icon on screen will turn to orange.
M7310 LTE-Advanced Mobile Wi-Fi User Guide
-32-