Kärcher HD 5/12 C Instruction Manual
Hide thumbs
Also See for HD 5/12 C:
- Manual (352 pages) ,
- Original instructions manual (65 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kärcher HD 5/12 C
Summary of Contents for Kärcher HD 5/12 C
- Page 1 HD 5/12 C English Français Español 59613690 09/10...
- Page 2 HD 5/12 C...
- Page 3 Close cover before operating the IMPORTANT SAFETY machine. INSTRUCTIONS This appliance is intended for com- mercial use. WARNING Follow the maintenance instruc- When using this product basic precau- tions specified in the manual. tions should always be followed, in- This machine has been designed for use with cleaning chemicals cluding the following: supplied or recommended by the...
- Page 4 Dirt in the feed water will damage the warnings shall be read to and dis- unit. To avoid this risk, we recommend cussed with the operator in the opera- fitting a water filter. tor’s native language by the purchaser/ Garden hose must be at least 3/4 –...
- Page 5 EXTENSION CORDS Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole cord connectors that accept the plug from the product. Use only ex- tension cords that are intended for out- door use. These extension cords are identified by a marking "Acceptable for use with out-door appliances: store in- doors while not in use."...
-
Page 6: Table Of Contents
Please read and comply with Old appliances contain valua- these instructions prior to the ble materials that can be recy- initial operation of your appliance. Retain cled; these should be sent for these operating instructions for future refer- recycling. Batteries, oil, and ence or for subsequent possessors. -
Page 7: Symbols On The Machine
the high-pressure jet is stopped. If the Symbols on the machine lever is pulled the pump is turned on again. High-pressure jets can be dan- gerous if improperly used. The – The overflow valve and pressure switch jet may not be directed at per- are set and sealed at the factory. -
Page 8: Start Up
Start up Water connection Connection to the water supply Electrical connection Warning Warning Observe regulations of water supplier. – The appliance may only be connected According to the applicable regula- to alternating current. tions, the appliance must never be – The appliance may only be connected used on the drinking water supply to an electrical supply which has been without a system separator. -
Page 9: Operation
Operation Operation with detergent Warning Danger Unsuitable detergents can cause damage If the appliance is used in hazardous areas to the appliance and to the object to be (e.g. filling stations) the corresponding cleaned. Use only those detergents that safety provisions must be observed. have been approved by Kärcher. -
Page 10: Maintenance And Care
Press the safety lever of the hand-spray es. Polluting the environment with used oil gun to secure the lever of the pistol is a punishable offence. against being released accidentally. Safety inspection/ maintenance Transport contract Pull the device behind you at the handle You can sign with your dealer a contract for for transporting it over longer distances. -
Page 11: Troubleshooting
Fill in new oil slowly; air bubbles should Pump is vibrating go out. Check suction pipes for water and de- Attach the lid of the oil container. tergent and ensure that they are leak- Fasten the device hood. proof. Troubleshooting Close dosing valve for detergent to op- erate the machine without detergent. -
Page 12: Technical Specifications
Technical specifications Type HD 5/12 C CDN/CSA Main Supply Voltage Current type 1~ 60 Connected load Protection (slow, char. C) Extension cord 30 m Water connection Max. feed temperature °F (°C) 140 (60) Min. feed volume gpm (l/min) 2.5 (9.5) Suck height from open container (20 °C)