Table of Contents
Advertisement
9.2.
BD Drive
9.2.1.
Tray
1. Insert the Paper clips, etc. into the hole of the bottom
side, and slide it to the direction of arrow until it can be.
2. Pull the Tray to the direction of arrow until it can be.
3. Push the two posts in front of the mecha chassis to both
sides of the drive to unlock the tray, and push it outward
simultaneously.
Notes when attaching the tray:
1. Push Slide cam to the left side slightly, and make sure
the tray band is between the two posts of Slide cam
when attaching the tray.
9.2.2.
Pulley Gear, Belt
1. Perform the step " Tray ".
2. Push the Post to the direction of arrow by using the
slotted screwdriver.
3. Remove the Pulley Gear and Belt.
35
Advertisement
Table of Contents
